Commander 2WD V6-3.7L VIN K (2006)
Valve Body: Description and Operation
UNIT-ELECTROHYDRAULIC
DESCRIPTION
The electrohydraulic control unit comprises the shift plate (13) made from light alloy for the hydraulic control and an electrical control unit (12). The
electrical control unit (12) comprises of a supporting body made of plastic, into which the electrical components (1 - 11) are assembled. The
supporting body is mounted on the shift plate (13) and screwed to it.
Strip conductors inserted into the supporting body make the connection between the electrical components and a plug connector. The connection to
the wiring harness on the vehicle and the transmission control module (TCM) is produced via this 13-pin plug connector with a bayonet lock.
ELECTRICAL CONTROL UNIT
