Commander 2WD V8-4.7L Flex Fuel (2009)
Trunk / Liftgate Latch: Service and Repair
Power Liftgate Latch - Removal
REMOVAL
1. Remove the liftgate lower trim panel, See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Removal.
2. Disengage outside handle link (1) from clip on latch (3).
3. Disconnect wire connectors (2) from liftgate latch (3).
4. Remove screws (2) attaching latch (3) to liftgate (1).
5. Remove latch from vehicle.
