Commander 2WD V8-4.7L Flex Fuel (2009)
Front Fender Liner: Service and Repair
Splash Shield - Installation
INSTALLATION
Front
1. Install the liner (1).
2. Install the rivets attaching the flare molding to the wheel liner . See: Exterior Moulding / Trim/Service and Repair/Body Side Molding -
Installation
3. Install the pushpins (2).
4. Install new rivets. rivets (3).
5. If required install the wheel.
Rear
1. Install the liner (1).
2. Install the rivets attaching the flare molding to the wheel liner . See: Exterior Moulding / Trim/Service and Repair/Body Side Molding -
Installation
3. Install the pushpins (2).
4. Install new rivets. rivets (3).
5. If required install the wheel.