Commander 2WD V8-4.7L Flex Fuel (2009)
Headliner: Service and Repair
Headliner - Installation
INSTALLATION
1. Position the headliner (5) into the vehicle from the liftgate.
2. Lift headliner into place and seat the fasteners (1) (hook and loop or clips) fully.
3. Install the grab handles (3) and install the screws.
4. Connect the headliner wire harness connectors (3) located at the left D-pillar.
5. Connect the rear washer hose (1).
6. Install the push pins (3).