Commander 2WD V8-4.7L Flex Fuel (2009)
A-Pillar Trim Panel-Installation
INSTALLATION
1. Position the locating tabs of the A-pillar trim panel into the slots located in the top of the instrument panel.
2. Install the A-pillar trim panel onto the A-pillar and install the two bolts. Tighten the bolts to 6 Nm (55 in. lbs.).
3. Close the two fastener covers located in the A-pillar trim panel.
Lower
INSTALLATION
1. Route the seat belt through the access door opening in the lower B-pillar trim panel.
2. Position the lower B-pillar trim panel to the B-pillar and engage the retaining tabs that secure the trim panel to the B-pillar.