Commander 2WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_2wd/v8-4.7l_flex_fuel/Page-3480023.png)
1. Connect the seat release cable (1), secure the cable housing into the bracket (3) and secure the clip (2).
2. Position the locating tabs on the bottom of the D-pillar trim panel into the slots in the top of the quarter trim panel.
3. Align the retaining tabs on the D-pillar trim panel with the retaining clips in the D-pillar and engage the retaining tabs that secure the trim panel to
the D-pillar.
4. Install the rear header molding. See: Rear Header Panel - Installation.
Rear Header Panel - Removal