Commander 2WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_2wd/v8-4.7l_flex_fuel/Page-3683003.png)
2. Connect the cable ends (1) to the latch levers (2).
3. Position the latch assembly (1) back into the seat frame assembly (2).
4. Install the bolts (1) and tighten to 55 Nm (41 ft. lbs.).
2. Connect the cable ends (1) to the latch levers (2).
3. Position the latch assembly (1) back into the seat frame assembly (2).
4. Install the bolts (1) and tighten to 55 Nm (41 ft. lbs.).