Commander 2WD V8-4.7L Flex Fuel (2009)
1. Cut off damaged tube with Tubing Cutter.
2. Remove any burrs from the inside of the tube.
3. Install tube nut on the tube.
4. Position the tube (5) in the flaring tool flush with the top of the tool bar (6). Then tighten the tool bar (6) on the tube (5).
5. Install the correct size adaptor (2, 3) on the flaring tool yoke screw (1).
6. Lubricate the adaptor.
7. Align the adaptor and yoke screw (1) over the tube (5).
8. Turn the yoke screw (1) in until the adaptor is squarely seated on the tool bar (6).