Commander 2WD V8-4.7L Flex Fuel (2009)
14. Remove the one nut and one bolt (2) that secure the rear HVAC housing (3) to the rear interior quarter panel (1).
15. Remove the rear HVAC housing from the vehicle and if required, remove the distribution duct (4) from the front of the HVAC housing.
Rear HVAC Housing Installation
INSTALLATION
1. If removed, install the distribution duct (4) onto the front of the rear HVAC housing (3).
2. Position the rear HVAC housing into the vehicle.
3. Install the one nut and one bolt (2) that secure the rear HVAC housing to the rear interior quarter panel (1). Tighten the fasteners to 3 Nm (27 in.
lbs.).