Commander 2WD V8-4.7L Flex Fuel (2009)
4. Pull the base of the bulb (1) straight out of the bulb holder within the lamp housing.
Third Row
BULB - THIRD ROW
1. Disconnect and isolate the battery negative cable.
2. Insert the tip of a small flat-bladed screwdriver into the notch on the switch (2) side of the third row reading lamp between the lens (4) and the
lamp housing (1).
3. Gently pry the notched edge of the lens downward until it unsnaps from the housing.
4. Swing the notched end of the lens downward far enough to access the bulb (3).
5. Carefully unsnap the bulb from the two bulb holders within the lamp housing.
