Commander 2WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_2wd/v8-4.7l_flex_fuel/Page-1484001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
3.7L/4.7L
1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor o-ring seal (2) for cuts or tears.
3. Position MAP sensor into manifold by sliding sensor over locating pin (6).
4. Install mounting bolt (8). Tighten to 3 Nm (25 in. lbs.) torque.
5. Connect electrical connector (2).