Commander 2WD V8-4.7L Flex Fuel (2009)
1. Install the line (5) to the vehicle.
2. Reconnect the power steering return hose (5) to the power steering cooler (4).
3. Reconnect the power steering return hose (5) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
4. Refill the power steering fluid and bleed the system See: Service and Repair/Power Steering System Bleeding.
Return Hose - Gear to Cooler
RETURN HOSE - GEAR TO COOLER
1. Install the line (3) to the vehicle.
2. Reconnect the power steering return hose (3) to the power steering gear (7) Tighten to 28 Nm (21 ft.lbs.).
3. Reconnect the power steering return hose (3) to the fluid cooler (4).
4. Refill the power steering fluid and bleed the system See: Service and Repair/Power Steering System Bleeding.
