Commander 2WD V8-4.7L Flex Fuel (2009)
Control Arm: Service and Repair
Front Upper Control Arm - Installation
INSTALLATION
1. Install the upper control arm (5) to the vehicle.
2. Install the nut and bolt (1) securing the upper control arm (5) to the body and tighten to 108 Nm (80 ft lbs).
3. Install the upper ball joint (2) into the knuckle (3).
4. Install the upper ball joint retaining nut (4) and tighten the nut to 95 Nm (70 ft.lbs.).