Commander 2WD V8-4.7L Flex Fuel (2009)
Rear Cross-Member: Service and Repair
Rear Body Cradle - Removal
REMOVAL
1. Remove the rear fascia. See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Rear Bumper Fascia -
Removal
2. Remove the spare wheel.
3. Remove the tail lamps.
4. Disconnect the tire pressure monitor sensor, if equipped.
5. Separate the right harness hangers and position the harness through the cradle.
