Commander 2WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_2wd/v8-4.7l_flex_fuel/Page-2590013.png)
1. Install the clevis bracket (4) to the shock (3) and tighten to 122 Nm (90 ft. lbs.).
2. Install the shock assembly (3) to the vehicle.
3. Install the four upper shock nuts (1), Tighten to 95 Nm ( 70 ft. lbs.).
4. Install the coolant reservoir bolt.
5. Reconnect the cruise control servo wiring connector.
6. Install the air box cover and air intake hose.
7. Raise the vehicle up.