Removing Power Window Switch on Commander 2WD V8-47L Flex Fuel
Power Window Switch: Service and Repair
Power Window Switch - Removal
REMOVAL
The driver and front passenger side power window switch is included in the window/lock switch. See: Body and Frame/Locks/Power Locks/Power
Door Lock Switch/Service and Repair/Power Lock Switch - Removal for the service procedures.
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Removal.
3. Remove switch from door trim panel.