Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to PASSENGER POWER SEAT SWITCH CONTINUITY table. If not
OK, replace the faulty power seat switch. If switch tests OK refer to Power Seat testing.
DRIVER WITH MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITH MEMORY SEAT SYSTEM
CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK refer to Power Seat testing.