Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Brake Fluid: Description and Operation
Brake Fluid - Export
BRAKE FLUID - EXPORT
The brake fluid used in this vehicle must conform to DOT 3 specifications and SAE J1703 standards. If DOT 3 brake fluid is not available, brake fluid
conforming to DOT 4 specifications may be used in its place. The fluids are compatible, but DOT 4 usage may require additional fluid maintenance. No
other type of brake fluid is recommended or approved for usage in the vehicle brake system. Use only Mopar(R) Brake Fluid DOT 3 Motor Vehicle or
equivalent from a tightly sealed container.
CAUTION: Never use reclaimed brake fluid or fluid from an container which has been left open. An open container of brake fluid will absorb
moisture from the air and contaminate the fluid.
CAUTION: Never use any type of a petroleum-based fluid in the brake hydraulic system. Use of such type fluids will result in seal damage of
the vehicle brake hydraulic system causing a failure of the vehicle brake system. Petroleum based fluids would be items such as engine oil,
transmission fluid, power steering fluid, etc.
