Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
6. Remove the five screws (1) that secure the heater core and tube cover (2) to the HVAC housing (3).
7. Remove the heater core and tube cover from the HVAC housing.
NOTE: Take proper precautions to protect the carpeting from spilled engine coolant. Have absorbent toweling readily available to clean up any
spills.
8. Remove the screw (1) that secures the heater core tube retaining bracket (2) to the HVAC housing (3).
9. Remove the bolt (5) that secures the heater core tubes (4) to the heater core (6).
10. Disconnect the heater core tubes from the heater core and remove and discard the O-ring seals.
11. Install plugs in, or tape over the opened heater core tubes and heater core ports.
