Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Throttle Body: Service and Repair
Installation
4.7L
1. Check condition of throttle body-to-intake manifold O-ring. Replace as necessary.
2. Clean mating surfaces of throttle body and intake manifold.
3. Install throttle body-to-intake manifold O-ring.
4. Install throttle body to intake manifold.
5. Install 3 mounting bolts (1) Tighten bolts to 12 Nm (105 in. lbs.) torque.
6. Install control cables.
7. Install electrical connectors.
8. Install necessary vacuum lines.
9. Install air plenum.