jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC's P1128/P1129|Page 5634 > < Engine Controls - ECM Update For Driveability Issues|Page 5629
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON/DTC's P1128/P1129

NUMBER: 18-040-07

GROUP: Vehicle Performance

DATE: July 17, 2007

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.01 OR HIGHER FOR THIS BULLETIN.

SUBJECT:
FLASH: MIL Illumination Due To DIG P1128, P1129 When Vehicle Is Operated With A 38% To 40% Ethanol Fuel Blend

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2007

(WK)

Grand Cherokee

2007

(XK)

Commander

NOTE:

This bulletin applies to vehicles equipped with a 4.7L flex fuel engine (sales code EVD) and Federal Emissions (NAA).

SYMPTOM/CONDITION:

This condition will only occur when the vehicle is operated with a 38% to 40% ethanol fuel blend. The vehicle operator may experience a Malfunction
Indicator Lamp (MIL) illumination. Diagnosis may reveal that the MIL illumination is due to one of the following Diagnostic Trouble Codes (DTC):

^

P1128 - Closed Loop Fuel Not Achieved

^

P1129 - Closed Loop Fuel Not Achieved

DIAGNOSIS:

Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DIG's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS / EQUIPMENT REQUIRED:

Engine Controls - MIL ON/DTC's P1128/P1129|Page 5634 > < Engine Controls - ECM Update For Driveability Issues|Page 5629