Commander 2WD V8-5.7L VIN 2 (2006)
PISTON RING SPECIFICATION CHART
PISTON RING SPECIFICATION CHART
7. The No. 1 and No. 2 piston rings have a different cross section. Ensure No. 2 ring is installed with manufacturers I.D. mark (Dot) facing up,
towards top of the piston.
NOTE: Piston rings are installed in the following order:
^
Oil ring expander.
^
Lower oil ring side rail.
^
Upper oil ring side rail.
^
No. 2 Intermediate piston ring.
^
No. 1 Upper piston ring.
8. Install the oil ring expander.
9. Install upper side rail by placing one end between the piston ring groove and the expander ring. Hold end firmly and press down the portion to be
installed until side rail is in position. Repeat this step for the lower side rail.
