Commander 2WD V8-5.7L VIN 2 (2006)
1. Install the line (2) to the vehicle.
2. Reconnect the power steering pressure line (2) to the power steering gear (1) Tighten to 28 Nm (21 ft. lbs.).
3. Install the oil drip tray (1) and tighten the 3 bolts (2).
4. Install the front splash shield.
5. Lower the vehicle.
6. Reconnect the power steering pressure line to the power steering pump Tighten to 28 Nm (21 ft. lbs.).
7. Install the air cleaner assembly.
8. Refill the power steering fluid and bleed the system.