Commander 2WD V8-5.7L VIN 2 (2006)
6. Remove the through bolt (1) that secures the retainer bracket (2) to the top of the retractor pocket (4) on the front upper outboard corner of the seat
back frame (3).
7. Remove the retractor retainer bracket from the top of the retractor pocket on the seat back frame.
8. Remove the screw (3) below the pull strap (1) from the back of the seat back frame (2) that secures the retractor.
9. Remove the third row seat belt and retractor as a unit from the top of the pocket on the front upper outboard corner of the seat back frame.
INSTALLATION
