Commander 2WD V8-5.7L VIN 2 (2006)
Power Steering Pump: Service and Repair
Pulley
PULLEY
REMOVAL
CAUTION: Do not reuse the old power steering pump pulley it is not intended for reuse. A new pulley must be installed if removed.
1. Remove the power steering pump assembly.
2. Remove the pulley (2) from the pump (1) using (OTC9 7185) power steering pulley removal tool (3) or equivalent.
INSTALLATION
NOTE: 5.7L power steering pulley (1) must only be installed to the first notch (2) on the pulley Do not install the pulley flush to the hub (3).
CAUTION: Do not reuse the old power steering pump pulley it is not intended for reuse. A new pulley must be installed if removed.
1. Replace the pulley if it's bent, cracked, or loose.