Commander 4WD V6-3.7L VIN K (2007)
14. Remove the 2 front cable routing clamps and the 3 nuts (2&4).
15. Remove the front cable at the rear floor bracket.
16. Remove the front cable (3) at the hand lever (1).
17. Remove the front cable at the hand lever mounting bracket.
Rear
REAR
1. Remove the rear seat bottom.
2. Disconnect the (FDCM) final drive control module electrical connectors (1).
3. Remove the (FDCM) module bracket (2) mounting nuts.
4. Remove the rear sill plates.