Commander 4WD V6-3.7L VIN K (2007)
Wheel Fastener: Service and Repair
Removal
Front Wheel Stud
FRONT WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper, caliper adapter and rotor.
4. Remove stud (2) from hub with Remover C-4150-A (1).
Rear Wheel Stud
REAR WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper and rotor.
4. Remove stud (2) from hub with Remover 8677 (1).