Commander 4WD V6-3.7L VIN K (2007)
3. A locating pin (5) is used in place of one of the PCM mounting bolts. Pry clip (4) from pin (5).
4. Remove two PCM mounting bolts (2), and remove PCM from vehicle.
5. Position ground strap (3) to the side.
3. A locating pin (5) is used in place of one of the PCM mounting bolts. Pry clip (4) from pin (5).
4. Remove two PCM mounting bolts (2), and remove PCM from vehicle.
5. Position ground strap (3) to the side.