Commander 4WD V6-3.7L VIN K (2007)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
3.7L/4.7L
The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold. An O-ring (2) is used to seal the sensor to the intake
manifold.
1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor O-ring seal for cuts or tears.
3. Position sensor into manifold.
4. Install MAP sensor mounting bolts (screws). Refer to Torque Specifications.
5. Connect electrical connector.