Commander 4WD V6-3.7L VIN K (2007)
4. Remove the upper ball joint retaining nut.
5. Separate the upper ball joint (2) from the knuckle (3) using special tool #8677 (1).
6. Remove the nut and bolt (1) securing the upper control arm (5) to the body.
7. Remove the upper control arm (5) from the vehicle.
Installation
INSTALLATION
1. Install the upper control arm (5) to the vehicle.
2. Install the nut and bolt (1) securing the upper control arm (5) to the body and tighten to 108 Nm (80 ft lbs).