Commander 4WD V6-3.7L VIN K (2007)
1. Remove electrohydraulic unit from the vehicle.
2. Remove solenoid caps (1, 2).
3. Unscrew Torx(R) socket bolts (3, 4).
NOTE: Pay attention to the different lengths of the Torx(R) socket bolts.
4. Remove leaf springs (5).
5. Withdraw solenoid valves (6 - 11) from shift plate (13).
NOTE: Check O-rings on solenoid valves for damage and replace if necessary.
6. Bend away retaining lug on stiffening rib on transmission oil temperature sensor.
7. Remove electrohydraulic control module (12) from the shift plate (13).
8. Note the locations of the major shift valve group components for assembly reference.