Commander 4WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_4wd/v8-4.7l_flex_fuel/Page-4224002.png)
1. Disconnect and isolate the battery negative cable.
2. Reach under and behind the rear bumper fascia (4) to access the bottom of either of the two rear fog lamp housings (1).
3. Firmly grasp the socket (3) on the bottom of the housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the socket and bulb (2) straight out from the keyed opening in the housing.
5. Pull the base of the bulb straight out of the socket.