jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Relays and Modules - Wiper and Washer Systems > < Rear Defogger Relay - Removal
Page 1
background image

Heated Glass Element Relay: Service and Repair
Rear Defogger Relay - Installation

INSTALLATION

1. Position the EBL relay (2) into the proper receptacle of the junction block (JB) (1) located in the passenger compartment.
2. Align the EBL relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.
3. Install the JB See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Junction Block - Installation.
4. Reconnect the negative battery cable.

Relays and Modules - Wiper and Washer Systems > < Rear Defogger Relay - Removal