Commander 4WD V8-4.7L VIN N (2006)
Front Door Striker: Service and Repair
STRIKER
REMOVAL
1. Using a grease pencil or equivalent, mark the location of the door latch striker (2) on the b-pillar.
2. Remove the two bolts (1) that secure the striker to the b-pillar and remove the striker.
INSTALLATION
1. Position the door latch striker (2) onto the b-pillar and loosely install the two bolts (1).
2. Align the door latch striker to the b-pillar using the reference marks made during the removal procedure and tighten the bolts to 28 N.m (21 ft.lbs).
