Commander 4WD V8-4.7L VIN N (2006)
10.
Select "ECU View"
11.
Touch the screen to highlight either DDM or PDM in the list of modules.
12.
Select "More Options"
13.
Select "ECU Flash".
14.
Record the "Part Number", displayed on the "Flash DDM or PDM screen, for later reference.
15.
Select "Browse for New File". Follow the on screen instructions.
16.
Highlight the listed DDM or PDM calibration.
17.
Select "Download to Scantool".
18.
Select "Close" after the download is complete, then select "Back".
19.
Highlight the flash file and select "Update Controller". Follow the on screen instructions.
NOTE:
No matter which file is selected (DDM or PDM), the flash procedure will automatically update both (Right/Left) Door Modules.
20.
When the update is complete, select "OK".
21.
Verify that the part number changed at the top of the "Flash DDM or PDM" screen.
22.
Calibrate Express Up/Down Mode for each window by:
a.
Holding the power window switch down in the first detent (manual down mode). Drive the glass to the full down position (fully open).
b.
Drive the glass into the full up position (fully closed). Hold the switch up in the first detent (manual up mode) and stall for 1 full second,
continue depressing the switch for 1 second after glass has reached full up position.
c.
Test the express down by driving the glass to the full down position (fully open). Hold the switch down in the second detent (Express down
mode) for 1 second, then release switch.
d.
Test the express up by driving the glass to the full up position (fully closed). Hold the switch up in the second detent (Express up mode) for
1 second, then release switch.
e.
If the window does not go into Express Mode repeat steps 22A through 22D.
NOTE:
Due to the DDM or PDM programming procedure, a DTC may be set in other modules (TCM, BCM, SKREEM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate. From the "Home" screen select "System View". Then select "All DTCs". Press "Clear All
Stored DTCs" if there are any DTCs shown on the list.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
