Commander 4WD V8-4.7L VIN N (2006)
1. Connect the hood latch cable (2 and 3) to the hood latch (1).
2. Position the hood latch (4) to the upper radiator crossmember and loosely install the two nuts (3) that secure the latch to the crossmember.
3. Align the hood latch (4) to the upper radiator cross-member using the reference marks made during the removal procedure and tighten the bolts to
27 N.m (20 ft.lbs).
4. If required, adjust the hood to the correct position.
