jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Trim Panel > < Support-Visor
Page 1
background image

Sun Visor: Service and Repair
Visor

VISOR

REMOVAL

1. Remove the two screws that secure the sun visor to the roof panel and remove the sun visor from the headliner.
2. If equipped, disconnect the illuminated vanity mirror wire harness connector.

INSTALLATION

1. If equipped, connect the illuminated vanity mirror wire harness connector.
2. Position the sun visor on the headliner and install the two screws that secure the sun visor to the roof panel. Tighten the screws to 2 N.m (20

in.lbs).

Trim Panel > < Support-Visor