Commander 4WD V8-4.7L VIN N (2006)
2. Loosen the bolt (3) that secures the second row outboard seat belt lower anchor (2) and the seat latch striker bracket to the rear floor panel.
3. Disengage the lower anchor from the loosened seat latch striker bracket bolt.
4. Remove the trim plug (1) from the upper c-pillar trim.
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to
remove the trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
