Commander 4WD V8-4.7L VIN N (2006)
7.
Verify that the window regulator assembly is properly attached to the inner door panel. Tighten the five (5) attaching bolts to 8.8 N-m (75 in. lbs)
(Fig. 2).
8.
Verify that the window glass run channel is properly attached to the inner door panel. Tighten the upper nut and the lower screw to 10 N-m (90 in.
lbs) (Fig. 3).
9.
Verify that the glass run channel weatherstrip is fully seated to the glass run channel. Adjust as required.
10.
Inspect the window regulator operation, glass, regulator glass clamp and pad, and adjust the glass position.
