Commander 4WD V8-4.7L VIN N (2006)
Luggage Rack: Service and Repair
RACK-LUGGAGE
REMOVAL
1. For vehicles equipped with grab handles, use a trim stick C-4755 or equivalent and separate the upper grab handle cover (1).
2. For vehicles equipped with applique, remove the push pin fasteners and using a trim stick C-4755 or equivalent remove the rear applique (4).
3. Remove luggage rack end covers (3), pull straight up.
4. Loosen the cross bar knobs (1) and remove the cross bars, if equipped.
5. Remove the mounting screws (2).
6. Remove luggage rack bars.
