Commander 4WD V8-4.7L VIN N (2006)
Power Seat Motor: Service and Repair
Motor-Seat Adjuster
MOTOR-SEAT ADJUSTER
WARNING: A SEAT STRUCTURE THAT HAS SEEN SIGNIFICANT LOAD MAY HAVE THE LOCKING MECHANISM ACTIVATED
AND MAY EXHIBIT THE FOLLOWING SYMPTOMS:
-
LOCKING PAWL (2) LOOSE
-
LOCKING PAWL (2) ENGAGED INTO THE SEAT FRAME SIDEMEMBER (1)
-
HEIGHT ADJUSTER ONLY WORKS ON OUTBOARD SIDE
-
BROKEN OR MISSING SHEAR PIN (3)
IF ANY ONE OR MORE OF THESE SYMPTOMS EXIST REPLACE THE HEIGHT ADJUSTER ASSEMBLY. DO NOT ATTEMPT ANY
REPAIRS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR DEATH.
FRONT TILT MOTOR
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the affected seat with the inoperative motor (1).
3. Remove the seat cushion and pan.