Commander 4WD V8-4.7L VIN N (2006)
Power Seat Switch: Testing and Inspection
Driver With Memory Seat System
SWITCH-SEAT
DRIVER WITH MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Driver Power Seat Switch With Memory Seat System Continuity
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITH MEMORY SEAT SYSTEM
CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK refer to testing.
