Commander 4WD V8-4.7L VIN N (2006)
1. Position the front glass run channel (5) into the door.
2. Install the weatherstrip into the front glass run channel.
3. Engage the bolt (4) into the keyed hole (3) on the inside door panel.
4. Tighten the bolt (4) that secures the top of the front glass run channel to the inside door panel to 7.5 N.m (65 in.lbs).
5. Tighten the nut (5) that secures the bottom of the front glass run channel to the inside door panel to 7.5 N.m (65 in.lbs).
6. Install the front door glass.
7. Install the outside rearview mirror.
