Commander 4WD V8-4.7L VIN N (2006)
Brake Hose/Line: Service and Repair
Removal and Installation
BRAKE LINE
REMOVAL
1. Install a brake pedal prop rod.
2. Siphon the master cylinder reservoir.
3. Remove the Primary or Secondary brake tubes at the master cylinder.
4. Remove the Primary or Secondary brake tubes at the HCU.
INSTALLATION
1. Install the primary or secondary brake tubes to the master cylinder.
2. Install the primary or secondary brake tubes to the HCU.
3. Remove the brake pedal prop rod.
4. Fill and bleed the brake system.