jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Cruise Control Vacuum Reservoir|Description and Operation|Page 9083 > < Cruise Control Switch|Locations|Page 9079
Page 1
background image

Cruise Control Vacuum Reservoir: Description and Operation

RESERVOIR-VACUUM

DESCRIPTION

The vacuum reservoir is a plastic storage tank connected to an engine vacuum source by vacuum lines.

The reservoir (9) is attached to the side of the air cleaner filter housing (1).

A vacuum reservoir is not used with diesel engines or the 5.7L gas powered engine.

OPERATION

The vacuum reservoir is used to supply the vacuum needed to maintain proper speed control operation when engine vacuum drops, such as in climbing a
grade while driving. A one-way check valve is used in the vacuum line between the reservoir and the vacuum source. This check valve is used to trap
engine vacuum in the reservoir. On certain vehicle applications, this reservoir is shared with the heating/air-conditioning system. The vacuum reservoir
cannot be repaired and must be replaced if faulty.

Cruise Control Vacuum Reservoir|Description and Operation|Page 9083 > < Cruise Control Switch|Locations|Page 9079