Commander 4WD V8-4.7L VIN N (2006)
Radiator: Service and Repair
RADIATOR
REMOVAL
WARNING: Do not remove the cylinder block drain plugs or loosen the radiator draincock with the system hot and under pressure. Serious
burns from coolant can occur.
Do not waste reusable coolant. If the solution is clean, drain the coolant into a clean container for reuse.
WARNING: Constant tension hose clamps are used on most cooling system hoses. When removing or installing, use only tools designed for
servicing this type of clamp. Always wear safety glasses when servicing constant tension clamps.
CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only an original equipment
clamp with matching number or letter.