Commander 4WD V8-4.7L VIN N (2006)
NOTE: The viscous fan and fan shroud must be installed as an assembly.
2. Gently lay viscous fan into fan shroud.
3. Install the fan shroud to radiator mounting bolts, torque bolts to (6 Nm or 53 inch lbs.).
4. Thread the fan and fan drive onto the water pump pulley, and tighten nut using special tool 6958 spanner wrench and 8346 adapters.
5. Install accessory drive belt.
CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. If not, the engine may overheat due to the
water pump rotating in the wrong direction.