jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Drive Belts, Mounts, Brackets and Accessories > < Refacing Valve and Seats|Page 1929

Commander 4WD V8-4.7L VIN N (2006)

Page 3
background image

7. Install the camshaft bearing cap retaining bolts. Tighten the bolts 11 Nm (100 inch lbs.) in 1/2 turn increments in the sequence shown.
8. Position the hydraulic lash adjusters and rocker arms.

Drive Belts, Mounts, Brackets and Accessories > < Refacing Valve and Seats|Page 1929