Commander 4WD V8-4.7L VIN N (2006)
23. Install cylinder head covers.
NOTE: Before installing threaded plug in right cylinder head, the plug must be coated with sealant to prevent leaks.
24. Coat the large threaded access plug with MOPAR Thread Sealant with Teflon, then install into the right cylinder head and tighten to 81 Nm (60 ft.
lbs.).
25. Install the oil fill housing.
26. Install access plug in left cylinder head.
27. Install power steering pump.
28. Install radiator fan.
29. Fill cooling system.
30. Connect negative cable to battery.