Commander 4WD V8-4.7L VIN N (2006)
1. Position the left and right instrument panel and demister duct assemblies (2 and 4) to the instrument panel top cover (1).
2. Connect the instrument panel and demister duct assemblies to the panel end outlets (5) and the main distribution duct (3). Make sure that the duct
assemblies are correctly installed over the outlet seals.
3. Install the screws that secure the instrument panel and demister duct assemblies to the instrument panel top cover. Tighten the screws to 2 N.m (17
in. lbs.).
4. Position the center instrument panel ducts (6) to the instrument panel top cover.
5. Connect the center instrument panel ducts to the main distribution duct.
6. Install the screws that secure the center instrument panel ducts to the instrument panel top cover. Tighten the screws to 2 N.m (17 in. lbs.).
7. Install the instrument panel top cover onto the instrument panel.
8. Install the instrument panel.
